CrackPRO
CrackPRO is a fiber-reinforced ready to use crack filling paste suitable for filling cracks up to 3mm & 5mm width and depth on both interior and exterior surfaces. It is composed of acrylic polymer modified fillers and special additives. It has strong adhesion, water resistance, & is very easy to apply on all absorbent surfaces like plaster, wood, gypsum, POP & asbestos.
Cracks filled with CrackPRO enhance the subsequent painting's quality and life.
Features
![Easy To Use Easy To Use](https://www.magicrete.in/assets/uploads/2024/01/productfeature/07_1705668349.webp)
Easy To Use
Single Component Ready To Use & Easy To Apply Product
![Highly Flexible Highly Flexible](https://www.magicrete.in/assets/uploads/2024/01/productfeature/02-copy_1705668372.webp)
Highly Flexible
Can accomodate minor movements in cracks therefore does not crack.
![Superior Mechanical Strength Superior Mechanical Strength](https://www.magicrete.in/assets/uploads/2024/01/productfeature/01_1705668389.webp)
Superior Mechanical Strength
Reinforced with fibers for superior mechanical strength
![Strong Adhesion Strong Adhesion](https://www.magicrete.in/assets/uploads/2024/01/productfeature/01_1705668406.webp)
Strong Adhesion
Provides strong adhesion on all absorbent surfaces like plaster, asbestos, POP, wood, gypsum, etc.
![Over Coating Over Coating](https://www.magicrete.in/assets/uploads/2024/01/productfeature/01-copy_1705668425.webp)
Over Coating
Over coatable by any type of polymer based paints, after 24 hours.
![Water Resistance Water Resistance](https://www.magicrete.in/assets/uploads/2024/01/productfeature/03_1705668444.webp)
Water Resistance
Magicrete CrackPRO provides excellent water resistance ability and does not allow water seepage through cracks.
Technical Specification
PARAMETERS | SPECIFICATIONS |
---|---|
Appearance | Smooth & Thick Paste |
Specific Gravity | 1.40 +/- 0.02 |
Service Temperature Range | -15 to +80 |
Non Volatile Content | >70% |
Movement Accommodation Factor | +10 |
Extension Recovery | Min 75% |
Volume Shrinkage | 20% |
Tack Free Time | 30-40 Minutes |
Water Retentivity | Excellent |
Freeze or Thaw Stability | Passes 5 Cycles |
Complies with | ASTM C 834-91 |